|
The
following list is
the product line
offered by IMCORP.
Certain units
operate in
conjunction with
others. For further
information that
will meet your
needs, please
contact us for
more details.
Diagnostic System
 |
Estimator
EST 300
The
Estimator
System is
the core of
the IMCORP
diagnostic
system. It
provides a
user
friendly
Windows XP
platform for
the
proprietary
IMCORP
IMESTI
software.
This system
uses
advanced
digital
signal
processors
along with
high speed
data
acquisition
to enable
the user of
the IMESTI
software to
detect,
locate, and
diagnose
cable
defects in
field
conditions. |
|
|
Signal
Conditioner
SC 300
This unit is
the
sensitive
'ear' of the
IMCORP
Diagnostic
System. It
couples the
Estimator to
the cable
under test,
rejects the
excitation
voltage and
directs the
cable system
signal
responses to
appropriate
electronic
conditioning
circuits
prior to
channeling
the signal
to the
Estimator. |
|
|
pC
Sensitivity
Calibrator
PCC 100
A handheld
unit with
selectable
calibrated
pulse
generation
capability
used on
every test
to ensure
that the
IMCORP
Diagnostic
System's
sensitivity
is accurate
and the test
comparable
with cable
factory
tests. Each
pulse
selection is
calibrated
to a
specified
charge (pico
Coulomb)
output
ranging from
5 to 1000 pC. |
|
|
IMESTI
Software
This
software is
a robust,
dynamic,
Windows XP
based, user
interface
with the
IMCORP
Diagnostic
System.
Modules of
this
proprietary
software
package
enable the
user to
perform a
wide range
of
diagnostic
procedures
including
precision
cable system
mapping with
the IMCORP
Advanced TDR,
accurate
sensitivity
calibrating
with the pC
Sensitivity
Calibrator,
defect
physical
locating
confirming
with the
Location
Matcher,
global cable
condition
assessing
(Tangent
Delta), and
discrete
cable defect
locating
(partial
discharge
tests). |
Advanced TDR
(Time-Domain-Reflectometry)
The
Advanced TDR
provides precision
mapping of cable
system under test.
With a simple user
friendly interface,
the operator of this
unit can determine
the length of the
cable system, and
the location of
joints, neutral
corrosion, and other
severe physical
anomalies. The
Advanced TDR is
available in two
versions - portable
and permanent test
vehicle
installation.
PD Test Station
(For cable
manufacturing
plants)
Consists of a signal
conditioner,
Estimator, pC
Calibrator, TDR and
Matcher (optional).
M300 Field Pack
Consists of a PD
location matcher
system, TDR (Radar),
and partial
discharge (PD)
sensitivity
calibrator
technology.
Location Matcher PM
A200
A
powerful tool used
to confirm the
location of defects
in buried power
cable. Consisting
of a transmitter and
receiver set, the
Location Matcher
uses the module of
the IMESTI Software
to match a position
along the cable
route with the
estimated defect
location.
|
